The aim of this study is to analyze the best fitting geoid model for an arbitrary selected area of investigation. The Digital Finite Element Height Reference Surface (DFHRS) method, developed by Hochschule Karlsruhe has been chosen to define the height reference surface for the territory of Kosovo, which should be defined as national vertical datum. This approach allows the conversion of ellipsoidal heights determined by GPS into the standard heights, which refer to the height reference surface (HRS) of an orthometric, or normal surface system. The DFHRS is defined as continues HRS in arbitrary large areas by bivariate polynomials over an irregular grid (Jager, Schneid 2001). The DFHRS approach uses wide range of the input data (Geometric and Physical) and in our case there were 30 GPS/leveling height data as well as physical derivatives from different global geopotential models. The proposed approach has been successfully applied and results are compared to actual normal heights and in selected profiles of digital elevation reference surface calculated from the national control network. Special attention has been given to the choice of the geopotential model and the selection of the pass points in source and target surface.
Ameti, P., & Jager, R. (2016). On the definition of height reference surfaces over an arbitrary selected area by means of DFHRS approach. Geodesy and Cartography, 42(4), 115-121. https://doi.org/10.3846/20296991.2016.1268431
Authors who publish with this journal agree to the following terms
that this article contains no violation of any existing copyright or other third party right or any material of a libelous, confidential, or otherwise unlawful nature, and that I will indemnify and keep indemnified the Editor and THE PUBLISHER against all claims and expenses (including legal costs and expenses) arising from any breach of this warranty and the other warranties on my behalf in this agreement;
that I have obtained permission for and acknowledged the source of any illustrations, diagrams or other material included in the article of which I am not the copyright owner.
on behalf of any co-authors, I agree to this work being published in Geodesy and Cartography as Open Access, and licenced under a Creative Commons Licence, 4.0 https://creativecommons.org/licenses/by/4.0/legalcode. This licence allows for the fullest distribution and re-use of the work for the benefit of scholarly information.
For authors that are not copyright owners in the work (for example government employees), please contact VILNIUS TECH to make alternative agreements.
