Status quo and future trends of BIM-based coordination research: a critical review
Abstract
Enhancing coordination between stakeholders is a critical function of Building Information Modeling (BIM). Recently, there have been numerous studies investigating BIM-based coordination; however, no explicit attempt has been made to investigate the current status of relevant research and determine the future directions. Hence, this study examines the BIM-based coordination literature published from 2006 to 2020 through bibliometric literature searching, scientific mapping, and in-depth critical analysis to fill the research gap. After a comprehensive filtering process, 656 pieces of literature were collected from Scopus. To map the representative information in the BIM-based coordination research, the determination and visualization of the most influential scholars, journals, countries/regions, and articles, as well as their importance and relationships, were performed through VOSviewer. Four emerging research topics were further discussed according to the determined scientific map. Moreover, a framework that presents the existing research gaps and future research directions was proposed. This research provides a clear picture of the leading information and future research trends of the BIM-based coordination, contributing to the body of knowledge theoretically and offering references for related stakeholders practically.
Keyword : Building Information Modeling (BIM), construction management, coordination, network analysis, knowledge map
How to Cite
Wu, Z., Deng, K., Chen, C., Li, H., Antwi-Afari, M. F., & Wang, Y. (2022). Status quo and future trends of BIM-based coordination research: a critical review. Journal of Civil Engineering and Management, 28(6), 469–484. https://doi.org/10.3846/jcem.2022.16928
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Adamides, E., & Karacapilidis, N. (2020). Information technology for supporting the development and maintenance of open innovation capabilities. Journal of Innovation & Knowledge, 5(1), 29–38. https://doi.org/10.1016/j.jik.2018.07.001
Adegoriola, M. I., Lai, J. H. K., Chan, E. H., & Darko, A. (2021). Heritage building maintenance management (HBMM): A bibliometric-qualitative analysis of literature. Journal of Building Engineering, 42, 102416. https://doi.org/10.1016/j.jobe.2021.102416
Akinade, O. O., Oyedele, L. O., Ajayi, S. O., Bilal, M., Alaka, H. A., Owolabi, H. A., & Arawomo, O. O. (2018). Designing out construction waste using BIM technology: Stakeholders’ expectations for industry deployment. Journal of Cleaner Production, 180, 375–385. https://doi.org/10.1016/j.jclepro.2018.01.022
Akponeware, A. O., & Adamu, Z. A. (2017). Clash detection or clash avoidance? An investigation into coordination problems in 3D BIM. Buildings, 7(3), 75. https://doi.org/10.3390/buildings7030075
Azhar, S. (2011). Building Information Modeling (BIM): Trends, benefits, risks, and challenges for the AEC industry. Leadership and Management in Engineering, 11(3), 241–252. https://doi.org/10.1061/(ASCE)LM.1943-5630.0000127
Azhar, S., Khalfan, M., & Maqsood, T. (2015). Building information modelling (BIM): now and beyond. Construction Economics and Building, 12(4), 15–28. https://doi.org/10.5130/AJCEB.v12i4.3032
Baker, H. K., Pandey, N., Kumar, S., & Haldar, A. (2020). A bibliometric analysis of board diversity: Current status, development, and future research directions. Journal of Business Research, 108, 232–246. https://doi.org/10.1016/j.jbusres.2019.11.025
Becerik-Gerber, B., Gerber, D. J., & Ku, K. (2011). The pace of technological innovation in architecture, engineering, and construction education: Integrating recent trends into the curricula. Journal of Information Technology in Construction (ITcon), 16, 411–432.
Bornmann, L. (2015). Alternative metrics in scientometrics: a meta-analysis of research into three altmetrics. Scientometrics, 103(3), 1123–1144. https://doi.org/10.1007/s11192-015-1565-y
Boton, C., Pitti, Y., Forgues, D., & Iordanova, I. (2021). Investigating the challenges related to combining BIM and Last Planner System on construction sites. Frontiers of Engineering Management, 8(2), 172–182. https://doi.org/10.1007/s42524-019-0086-4
Braun, A., & Borrmann, A. (2019). Combining inverse photogrammetry and BIM for automated labeling of construction site images for machine learning. Automation in Construction, 106, 102879. https://doi.org/10.1016/j.autcon.2019.102879
buildingSMART. Finland. (2012). Common BIM requirements 2012. https://buildingsmart.fi/en/common-bim-requirements-2012/
Bynum, P., Issa, R. R. A., & Olbina, S. (2013). Building information modeling in support of sustainable design and construction. Journal of Construction Engineering and Management, 139(1), 24–34. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000560
Carvalho, J. P., Braganca, L., & Mateus, R. (2019). Optimising building sustainability assessment using BIM. Automation in Construction, 102, 170–182. https://doi.org/10.1016/j.autcon.2019.02.021
Chen, L. J., & Luo, H. B. (2014). A BIM-based construction quality management model and its applications. Automation in Construction, 46, 64–73. https://doi.org/10.1016/j.autcon.2014.05.009
Cerovsek, T. (2011). A review and outlook for a ‘building information model’ (BIM): a multi-standpoint framework for technological development. Advanced Engineering Informatics, 25(2), 224–244. https://doi.org/10.1016/j.aei.2010.06.003
Chen, C., & Tang, L. (2019). BIM-based integrated management workflow design for schedule and cost planning of building fabric maintenance. Automation in Construction, 107, 102944. https://doi.org/10.1016/j.autcon.2019.102944
Chen, P., & Thanh Chuong, N. (2019). A BIM-WMS integrated decision support tool for supply chain management in construction. Automation in Construction, 98, 289–301. https://doi.org/10.1016/j.autcon.2018.11.019
Chen, W., Chen, K., Cheng, J., Wang, C., & Gan, V. (2018a). BIM-based framework for automatic scheduling of facility maintenance work orders. Automation in Construction, 91, 15–30. https://doi.org/10.1016/j.autcon.2018.03.007
Chen, X., Liu, C., & Wu, I. (2018b). A BIM-based visualization and warning system for fire rescue. Advanced Engineering Informatics, 37, 42–53. https://doi.org/10.1016/j.aei.2018.04.015
Cheng, J. C., & Ma, L. Y. (2013). A BIM-based system for demolition and renovation waste estimation and planning. Waste Management, 33(6), 1539–1551. https://doi.org/10.1016/j.wasman.2013.01.001
Darko, A., Chan, A. P. C., Huo, X. S., & Owusu-Manu, D. (2019). A scientometric analysis and visualization of global green building research. Building and Environment, 149, 501–511. https://doi.org/10.1016/j.buildenv.2018.12.059
Dave, B., Kubler, S., Framling, K., & Koskela, L. (2016). Opportunities for enhanced lean construction management using Internet of Things standards. Automation in Construction, 61, 86–97. https://doi.org/10.1016/j.autcon.2015.10.009
Deng, M., Menassa, C. C., & Kamat, V. R. (2021). From BIM to digital twins: A systematic review of the evolution of intelligent building representations in the AEC-FM industry. Journal of Information Technology in Construction (ITcon), 26, 58–83. https://doi.org/10.36680/j.itcon.2021.005
Dossick, C. S., & Neff, G. (2010). Organizational divisions in BIM-enabled commercial construction. Journal of Construction Engineering and Management, 136(4), 459–467. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000109
Eadie, R., Browne, M., Odeyinka, H., McKeown, C., & McNiff, S. (2013). BIM implementation throughout the UK construction project life-cycle: An analysis. Automation in Construction, 36, 145–151. https://doi.org/10.1016/j.autcon.2013.09.001
Eastman, C. M., Eastman, C., Teicholz, P., Sacks, R., & Liston, K. (2011). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. John Wiley & Sons.
Edmondson, V., Cerny, M., Lim, M., Gledson, B., Lockley, S., & Woodward, J. (2018). A smart sewer asset information model to enable an ‘Internet of Things’ for operational wastewater management. Automation in Construction, 91, 193–205. https://doi.org/10.1016/j.autcon.2018.03.003
Goulding, J. S., Rahimian, F. P., & Wang, X. (2014). Virtual reality-based cloud BIM platform for integrated AEC projects. Journal of Information Technology in Construction (ITcon), 19, 308–325.
Grilo, A., & Jardim-Goncalves, R. (2010). Value proposition on interoperability of BIM and collaborative working environments. Automation in Construction, 19(5), 522–530. https://doi.org/10.1016/j.autcon.2009.11.003
Habibi, S. (2017). The promise of BIM for improving building performance. Energy and Buildings, 153, 525–548. https://doi.org/10.1016/j.enbuild.2017.08.009
Heigermoser, D., de Soto, B. G., Abbott, E. L. S., & Chua, D. K. H.
(2019). BIM-based Last Planner System tool for improving construction project management. Automation in Construction, 104, 246–254. https://doi.org/10.1016/j.autcon.2019.03.019
Hilfert, T., & König, M. (2016). Low-cost virtual reality environment for engineering and construction. Visualization in Engineering, 4, 2. https://doi.org/10.1186/s40327-015-0031-5
Hood, W. W., & Wilson, C. S. (2001). The literature of bibliometrics, scientometrics, and informetrics. Scientometrics, 52(2), 291–314. https://doi.org/10.1023/A:1017919924342
Hosseini, M. R., Maghrebi, M., Akbarnezhad, A., Martek, I., & Arashpour, M. (2018a). Analysis of citation networks in Building Information Modeling research. Journal of Construction Engineering and Management, 144(8), 04018064. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001492
Hosseini, M. R., Martek, I., Zavadskas, E. K., Aibinu, A. A., Arashpour, M., & Chileshe, N. (2018b). Critical evaluation of off-site construction research: A Scientometric analysis. Automation in Construction, 87, 235–247. https://doi.org/10.1016/j.autcon.2017.12.002
Hou, L., Wang, X. Y., & Truijens, M. (2015). Using augmented reality to facilitate piping assembly: An experiment-based evaluation. Journal of Computing in Civil Engineering, 29(1), 05014007. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000344
Hu, Y. Q., Castro-Lacouture, D., & Eastman, C. M. (2019). Holistic clash detection improvement using a component dependent network in BIM projects. Automation in Construction, 105, 102832. https://doi.org/10.1016/j.autcon.2019.102832
Jang, S., & Lee, G. (2018). Process, productivity, and economic analyses of BIM based multi-trade prefabrication – A case study. Automation in Construction, 89, 86–98. https://doi.org/10.1016/j.autcon.2017.12.035
Jang, S., Jeong, Y., Lee, G., & Kang, Y. (2019). Enhancing subcontractors’ participation in BIM-based design coordination under a DBB contract. Journal of Management in Engineering, 35(6), 04019022. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000714
Jin, R. Y., Zou, Y., Gidado, K., Ashton, P., & Painting, N. (2019). Scientometric analysis of BIM-based research in construction engineering and management. Engineering Construction and Architectural Management, 26(8), 1750–1776. https://doi.org/10.1108/Ecam-08-2018-0350
Kaewunruen, S., Sresakoolchai, J., & Zhou, Z. (2020). Sustainability-based lifecycle management for bridge infrastructure using 6D BIM. Sustainability, 12(6), 2436. https://doi.org/10.3390/su12062436
Kaffash, S., Nguyen, A. T., & Zhu, J. (2021). Big data algorithms and applications in intelligent transportation system: A review and bibliometric analysis. International Journal of Production Economics, 231, 107868. https://doi.org/10.1016/j.ijpe.2020.107868
Karan, E. P., & Irizarry, J. (2015). Extending BIM interoperability to preconstruction operations using geospatial analyses and semantic web services. Automation in Construction, 53, 1–12. https://doi.org/10.1016/j.autcon.2015.02.012
Kensek, K., Ding, Y., & Longcore, T. (2016). Green building and biodiversity: Facilitating bird friendly design with building information models. Journal of Green Building, 11(2), 116–130. https://doi.org/10.3992/jgb.11.2.116.1
Khanzode, A., Fischer, M., & Reed, D. (2008). Benefits and lessons learned of implementing Building Virtual Design and Construction (VDC) technologies for coordination of Mechanical, Electrical, and Plumbing (MEP) systems on a large healthcare project. Journal of Information Technology in Construction (ITcon), 13, 324–342.
Khudhair, A., Li, H. J., Ren, G. Q., & Liu, S. (2021). Towards future BIM technology innovations: A bibliometric analysis of the literature. Applied Sciences, 11(3), 1232. https://doi.org/10.3390/app11031232
Lee, J., & Kim, J. (2017). BIM-Based 4D simulation to improve module manufacturing productivity for sustainable building projects. Sustainability, 9(3), 426. https://doi.org/10.3390/su9030426
Lee, G., & Borrmann, A. (2020). BIM policy and management. Construction Management and Economics, 38(5), 413–419. https://doi.org/10.1080/01446193.2020.1726979
Leite, F., Akcamete, A., Akinci, B., Atasoy, G., Kiziltas, S. (2011). Analysis of modeling effort and impact of different levels of detail in building information models. Automation in Construction, 20(5), 601–609. https://doi.org/10.1016/j.autcon.2010.11.027
Li, C. Z. D., Zhong, R. Y., Xue, F., Xu, G. Y., Chen, K., Huang, G. G. Q., & Shen, G. Q. P. (2017). Integrating RFID and BIM technologies for mitigating risks and improving schedule performance of prefabricated house construction. Journal of Cleaner Production, 165, 1048–1062. https://doi.org/10.1016/j.jclepro.2017.07.156
Li, C. Z., Xue, F., Li, X., Hong, J. K., & Shen, G. Q. (2018). An Internet of Things-enabled BIM platform for on-site assembly services in prefabricated construction. Automation in Construction, 89, 146–161. https://doi.org/10.1016/j.autcon.2018.01.001
Lindblad, H., & Guerrero, J. R. (2020). Client’s role in promoting BIM implementation and innovation in construction. Construction Management and Economics, 38(5), 468–482. https://doi.org/10.1080/01446193.2020.1716989
Liu, Y., van Nederveen, S., & Hertogh, M. (2017). Understanding effects of BIM on collaborative design and construction empirical study in China. International Journal of Project Management, 35(4), 686–698. https://doi.org/10.1016/j.ijproman.2016.06.007
Ma, Z. L., Zhang, D. D., & Li, J. L. (2018). A dedicated collaboration platform for Integrated Project Delivery. Automation in Construction, 86, 199–209. https://doi.org/10.1016/j.autcon.2017.10.024
Mahalingam, A., Yadav, A. K., & Varaprasad, J. (2015). Investigating the role of lean practices in enabling BIM adoption: Evidence from two Indian cases. Journal of Construction Engineering and Management, 141(7), 05015006. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000982
Martínez, J. M. G., Carracedo, P., Comas, D. G., & Siemens, C. H. (2022). An analysis of the blockchain and COVID-19 research landscape using a bibliometric study. Sustainable Technology and Entrepreneurship, 1(1), 100006. https://doi.org/10.1016/j.stae.2022.100006
Meho, L. I., & Rogers, Y. (2008). Citation counting, citation ranking, and h-index of human-computer interaction researchers: A comparison of Scopus and Web of Science. Journal of the American Society for Information Science and Technology, 59(11), 1711–1726. https://doi.org/10.1002/asi.20874
Miettinen, R., & Paavola, S. (2014). Beyond the BIM utopia: Approaches to the development and implementation of building information modeling. Automation in Construction, 43, 84–91. https://doi.org/10.1016/j.autcon.2014.03.009
Mirshokraei, M., De Gaetani, C. I., & Migliaccio, F. (2019). A web-based BIM–AR quality management system for structural elements. Applied Sciences, 9(19), 3984. https://doi.org/10.3390/app9193984
Mongeon, P., & Paul-Hus, A. (2016). The journal coverage of Web of Science and Scopus: A comparative analysis. Scientometrics, 106(1), 213–228. https://doi.org/10.1007/s11192-015-1765-5
Monteiro, A., & Martins, J. P. (2013). A survey on modeling guidelines for quantity takeoff-oriented BIM-based design. Automation in Construction, 35, 238–253. https://doi.org/10.1016/j.autcon.2013.05.005
Mostad, I. L., Qvigstad, E., Bjerve, K. S., & Grill, V. E. (2004). Effects of a 3-day low-fat diet on metabolic control, insulin sensitivity, lipids and adipocyte hormones in Norwegian subjects with hypertriacylglycerolaemia and type 2 diabetes. Scandinavian Journal of Clinical and Laboratory Investigation, 64(6), 565–574. https://doi.org/10.1080/00365510410007053
Muller, M. F., Garbers, A., Esmanioto, F., Huber, N., Loures, E. R., & Canciglieri, O. (2017). Data interoperability assessment though IFC for BIM in structural design – a five-year gap analysis. Journal of Civil Engineering and Management, 23(7), 943–954. https://doi.org/10.3846/13923730.2017.1341850
Olawumi, T. O., & Chan, D. W. M. (2018). A scientometric review of global research on sustainability and sustainable development. Journal of Cleaner Production, 183, 231–250. https://doi.org/10.1016/j.jclepro.2018.02.162
Oraee, M., Hosseini, M. R., Papadonikolaki, E., Palliyaguru, R., & Arashpour, M. (2017). Collaboration in BIM-based construction networks: A bibliometric-qualitative literature review. International Journal of Project Management, 35(7), 1288–1301. https://doi.org/10.1016/j.ijproman.2017.07.001
Oraee, M., Hosseini, M. R., Edwards, D. J., Li, H., Papadonikolaki, E., & Cao, D. (2019). Collaboration barriers in BIM-based construction networks: A conceptual model. International Journal of Project Management, 37(6), 839–854. https://doi.org/10.1016/j.ijproman.2019.05.004
Plume, J., & Mitchell, J. (2007). Collaborative design using a shared IFC building model – Learning from experience. Automation in Construction, 16(1), 28–36. https://doi.org/10.1016/j.autcon.2005.10.003
Porwal, A., & Hewage, K. N. (2013). Building Information Modeling (BIM) partnering framework for public construction projects. Automation in Construction, 31, 204–214. https://doi.org/10.1016/j.autcon.2012.12.004
Raouf, A. M., & Al-Ghamdi, S. G. (2019). Effectiveness of project delivery systems in executing green buildings. Journal of Construction Engineering and Management, 145(10), 03119005. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001688
Ratajczak, J., Riedl, M., & Matt, D. T. (2019). BIM-based and AR application combined with location-based management system for the improvement of the construction performance. Buildings, 9(5), 118. https://doi.org/10.3390/buildings9050118
Rosayuru, H. D. R. R., Waidyasekara, K. G. A. S., & Wijewickrama, M. K. C. S. (2022). Sustainable BIM based integrated project delivery system for construction industry in Sri Lanka. International Journal of Construction Management, 22(5), 769–783. https://doi.org/10.1080/15623599.2019.1645263
Sacks, R., Radosavljevic, M., & Barak, R. (2010). Requirements for building information modeling based lean production management systems for construction. Automation in Construction, 19(5), 641–655. https://doi.org/10.1016/j.autcon.2010.02.010
Sacks, R., Barak, R., Belaciano, B., Gurevich, U., & Pikas, E. (2013). KanBIM workflow management system: Prototype implementation and field testing. Lean Construction Journal, 2013, 19–35.
Sakin, M., & Kiroglu, Y. C. (2017). 3D printing of buildings: Construction of the sustainable houses of the future by BIM. Energy Procedia, 134, 702–711. https://doi.org/10.1016/j.egypro.2017.09.562
Santos, R., Costa, A. A., & Grilo, A. (2017). Bibliometric analysis and review of Building Information Modelling literature published between 2005 and 2015. Automation in Construction, 80, 118–136. https://doi.org/10.1016/j.autcon.2017.03.005
Shan, M., & Hwang, B. G. (2018). Green building rating systems: Global reviews of practices and research efforts. Sustainable Cities and Society, 39, 172–180. https://doi.org/10.1016/j.scs.2018.02.034
Singh, V., Gu, N., & Wang, X. Y. (2011). A theoretical framework of a BIM-based multi-disciplinary collaboration platform. Automation in Construction, 20(2), 134–144. https://doi.org/10.1016/j.autcon.2010.09.011
Su, L. (2017). Digitalization and application research of BIM-based power plants lifecycle information. Smart Innovation, 62, 218–224. https://doi.org/10.1007/978-981-10-3575-3_22
Succar, B. (2009). Building information modelling framework: A research and delivery foundation for industry stakeholders. Automation in Construction, 18(3), 357–375. https://doi.org/10.1016/j.autcon.2008.10.003
Tan, Y., Fang, Y., Zhou, T., Gan, V. J. L., & Cheng, J. C. P. (2019). BIM-supported 4D acoustics simulation approach to mitigating noise impact on maintenance workers on offshore oil and gas platforms. Automation in Construction, 100, 1–10. https://doi.org/10.1016/j.autcon.2018.12.019
Tateyama, K. (2017). A new stage of construction in Japan – i-construction. IPA News Letter, 2(2), 2–11.
Teizer, J., Golovina, O., Embers, S., & Wolf, M. (2020). A serious gaming approach to integrate BIM, IoT, and Lean construction in construction education. In Construction Research Congress 2020: Project Management and Controls, Materials, and Contracts, Tempe, Arizona. https://doi.org/10.1061/9780784482889.003
USACE. (2012). The US Army Corps of Engineers roadmap for life-cycle Building Information Modeling (BIM). https://erdc-library.erdc.dren.mil/jspui/handle/11681/4765
van Eck, N. J., & Waltman, L. (2014). CitNetExplorer: A new software tool for analyzing and visualizing citation networks. Journal of Informetrics, 8(4), 802–823. https://doi.org/10.1016/j.joi.2014.07.006
van Eck, N. J., & Waltman, L. (2017). Citation-based clustering of publications using CitNetExplorer and VOSviewer. Scientometrics, 111(2), 1053–1070. https://doi.org/10.1007/s11192-017-2300-7
Wang, J., Hou, L., Chong, H.-Y., Liu, X., Wang, X., & Guo, J. (2014). A cooperative system of GIS and BIM for traffic planning: A high-rise building case study. In Y. Luo (Ed.), Lecture notes in computer science: Vol 8683. Cooperative design, visualization, and engineering. CDVE 2014. Springer, Cham. https://doi.org/10.1007/978-3-319-10831-5_20
Wang, S. H., Wang, W. C., Wang, K. C., & Shih, S. Y. (2015). Applying building information modeling to support fire safety management. Automation in Construction, 59, 158–167. https://doi.org/10.1016/j.autcon.2015.02.001
Wang, T.-K., & Piao, Y. (2019). Development of BIM-AR-based facility risk assessment and maintenance system. Journal of Performance of Constructed Facilities, 33(6), 04019068. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001339
Wang, Y. K., Wang, S. L., Yang, B., Zhu, L. Z., & Liu, F. (2020). Big data driven Hierarchical Digital Twin Predictive Remanufacturing paradigm: Architecture, control mechanism, application scenario and benefits. Journal of Cleaner Production, 248, 15. https://doi.org/10.1016/j.jclepro.2019.119299
Wu, T., & Jeng, T. (2018). A cloud-based BIM platform for interior design. Journal of Design, 23(1), 43–60. https://doi.org/10.1111/joid.12123
Wu, W., Li, W. J., Law, D. F., & Na, W. K. (2015). Improving data center energy efficiency using a cyber-physical systems approach: Integration of building information modeling and wireless sensor networks. Procedia Engineering, 118, 1266–1273. https://doi.org/10.1016/j.proeng.2015.08.481
Wu, Z., Chen, C., Cai, Y., Lu, C., Wang, H., & Yu, T. (2019). BIM-based visualization research in the construction industry: A network analysis. International Journal of Environmental Research and Public Health, 16(18), 3473. https://doi.org/10.3390/ijerph16183473
Xie, X., Zang, Z., & Ponzoa, J. M. (2020). The information impact of network media, the psychological reaction to the COVID-19 pandemic, and online knowledge acquisition: Evidence from Chinese college students. Journal of Innovation & Knowledge, 5(4), 297–305. https://doi.org/10.1016/j.jik.2020.10.005
Yi, W., & Chan, A. P. C. (2014). Critical review of labor productivity research in construction journals. Journal of Management in Engineering, 30(2), 214–225. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000194
Yin, X. F., Liu, H. X., Chen, Y., & Al-Hussein, M. (2019). Building information modelling for off-site construction: Review and future directions. Automation in Construction, 101, 72–91. https://doi.org/10.1016/j.autcon.2019.01.010
Zaker, R., & Coloma, E. (2018). Virtual reality-integrated workflow in BIM-enabled projects collaboration and design review: a case study. Visualization in Engineering, 6, 4. https://doi.org/10.1186/s40327-018-0065-6
Zanni, M.-A., Soetanto, R., & Ruikar, K. (2014). Defining the sustainable building design process: methods for BIM execution planning in the UK. International Journal of Energy Sector Management, 8(4), 562–587. https://doi.org/10.1108/IJESM-04-2014-0005
Zhang, J. P., Liu, Q., Hu, Z. Z., Lin, J. R., & Yu, F. Q. (2017a). A multi-server information-sharing environment for cross-party collaboration on a private cloud. Automation in Construction, 81, 180–195. https://doi.org/10.1016/j.autcon.2017.06.021
Zhang, S. R., Pan, F., Wang, C., Sun, Y. J., & Wang, H. X. (2017b). BIM-based collaboration platform for the management of EPC projects in hydropower engineering. Journal of Construction Engineering and Management, 143(12), 04017087. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001403
Zhang, X., Azhar, S., Nadeem, A., & Khalfan, M. (2018). Using Building Information Modelling to achieve Lean principles by improving efficiency of work teams. International Journal of Construction Management, 18(4), 293–300. https://doi.org/10.1080/15623599.2017.1382083
Zhao, X. (2017). A scientometric review of global BIM research: Analysis and visualization. Automation in Construction, 80, 37–47. https://doi.org/10.1016/j.autcon.2017.04.002
Zhao, X. B., Zuo, J., Wu, G. D., & Huang, C. (2019). A bibliometric review of green building research 2000–2016. Architectural Science Review, 62(1), 74–88. https://doi.org/10.1080/00038628.2018.1485548
Zheng, L. Z., Lu, W. S., Chen, K., Chau, K. W., & Niu, Y. H. (2017). Benefit sharing for BIM implementation: Tackling the moral hazard dilemma in inter-firm cooperation. International Journal of Project Management, 35(3), 393–405. https://doi.org/10.1016/j.ijproman.2017.01.006
Zheng, R. Y., Jiang, J. L., Hao, X. H., Ren, W., Xiong, F., & Ren, Y. (2019). bcBIM: A Blockchain-Based Big Data Model for BIM modification audit and provenance in mobile cloud. Mathematical Problems in Engineering, 2019, 5349538. https://doi.org/10.1155/2019/5349538
Zheng, X., Le, Y., Chan, A. P. C., Hu, Y., & Li, Y. K. (2016). Review of the application of social network analysis (SNA) in construction project management research. International Journal of Project Management, 34(7), 1214–1225. https://doi.org/10.1016/j.ijproman.2016.06.005
Adegoriola, M. I., Lai, J. H. K., Chan, E. H., & Darko, A. (2021). Heritage building maintenance management (HBMM): A bibliometric-qualitative analysis of literature. Journal of Building Engineering, 42, 102416. https://doi.org/10.1016/j.jobe.2021.102416
Akinade, O. O., Oyedele, L. O., Ajayi, S. O., Bilal, M., Alaka, H. A., Owolabi, H. A., & Arawomo, O. O. (2018). Designing out construction waste using BIM technology: Stakeholders’ expectations for industry deployment. Journal of Cleaner Production, 180, 375–385. https://doi.org/10.1016/j.jclepro.2018.01.022
Akponeware, A. O., & Adamu, Z. A. (2017). Clash detection or clash avoidance? An investigation into coordination problems in 3D BIM. Buildings, 7(3), 75. https://doi.org/10.3390/buildings7030075
Azhar, S. (2011). Building Information Modeling (BIM): Trends, benefits, risks, and challenges for the AEC industry. Leadership and Management in Engineering, 11(3), 241–252. https://doi.org/10.1061/(ASCE)LM.1943-5630.0000127
Azhar, S., Khalfan, M., & Maqsood, T. (2015). Building information modelling (BIM): now and beyond. Construction Economics and Building, 12(4), 15–28. https://doi.org/10.5130/AJCEB.v12i4.3032
Baker, H. K., Pandey, N., Kumar, S., & Haldar, A. (2020). A bibliometric analysis of board diversity: Current status, development, and future research directions. Journal of Business Research, 108, 232–246. https://doi.org/10.1016/j.jbusres.2019.11.025
Becerik-Gerber, B., Gerber, D. J., & Ku, K. (2011). The pace of technological innovation in architecture, engineering, and construction education: Integrating recent trends into the curricula. Journal of Information Technology in Construction (ITcon), 16, 411–432.
Bornmann, L. (2015). Alternative metrics in scientometrics: a meta-analysis of research into three altmetrics. Scientometrics, 103(3), 1123–1144. https://doi.org/10.1007/s11192-015-1565-y
Boton, C., Pitti, Y., Forgues, D., & Iordanova, I. (2021). Investigating the challenges related to combining BIM and Last Planner System on construction sites. Frontiers of Engineering Management, 8(2), 172–182. https://doi.org/10.1007/s42524-019-0086-4
Braun, A., & Borrmann, A. (2019). Combining inverse photogrammetry and BIM for automated labeling of construction site images for machine learning. Automation in Construction, 106, 102879. https://doi.org/10.1016/j.autcon.2019.102879
buildingSMART. Finland. (2012). Common BIM requirements 2012. https://buildingsmart.fi/en/common-bim-requirements-2012/
Bynum, P., Issa, R. R. A., & Olbina, S. (2013). Building information modeling in support of sustainable design and construction. Journal of Construction Engineering and Management, 139(1), 24–34. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000560
Carvalho, J. P., Braganca, L., & Mateus, R. (2019). Optimising building sustainability assessment using BIM. Automation in Construction, 102, 170–182. https://doi.org/10.1016/j.autcon.2019.02.021
Chen, L. J., & Luo, H. B. (2014). A BIM-based construction quality management model and its applications. Automation in Construction, 46, 64–73. https://doi.org/10.1016/j.autcon.2014.05.009
Cerovsek, T. (2011). A review and outlook for a ‘building information model’ (BIM): a multi-standpoint framework for technological development. Advanced Engineering Informatics, 25(2), 224–244. https://doi.org/10.1016/j.aei.2010.06.003
Chen, C., & Tang, L. (2019). BIM-based integrated management workflow design for schedule and cost planning of building fabric maintenance. Automation in Construction, 107, 102944. https://doi.org/10.1016/j.autcon.2019.102944
Chen, P., & Thanh Chuong, N. (2019). A BIM-WMS integrated decision support tool for supply chain management in construction. Automation in Construction, 98, 289–301. https://doi.org/10.1016/j.autcon.2018.11.019
Chen, W., Chen, K., Cheng, J., Wang, C., & Gan, V. (2018a). BIM-based framework for automatic scheduling of facility maintenance work orders. Automation in Construction, 91, 15–30. https://doi.org/10.1016/j.autcon.2018.03.007
Chen, X., Liu, C., & Wu, I. (2018b). A BIM-based visualization and warning system for fire rescue. Advanced Engineering Informatics, 37, 42–53. https://doi.org/10.1016/j.aei.2018.04.015
Cheng, J. C., & Ma, L. Y. (2013). A BIM-based system for demolition and renovation waste estimation and planning. Waste Management, 33(6), 1539–1551. https://doi.org/10.1016/j.wasman.2013.01.001
Darko, A., Chan, A. P. C., Huo, X. S., & Owusu-Manu, D. (2019). A scientometric analysis and visualization of global green building research. Building and Environment, 149, 501–511. https://doi.org/10.1016/j.buildenv.2018.12.059
Dave, B., Kubler, S., Framling, K., & Koskela, L. (2016). Opportunities for enhanced lean construction management using Internet of Things standards. Automation in Construction, 61, 86–97. https://doi.org/10.1016/j.autcon.2015.10.009
Deng, M., Menassa, C. C., & Kamat, V. R. (2021). From BIM to digital twins: A systematic review of the evolution of intelligent building representations in the AEC-FM industry. Journal of Information Technology in Construction (ITcon), 26, 58–83. https://doi.org/10.36680/j.itcon.2021.005
Dossick, C. S., & Neff, G. (2010). Organizational divisions in BIM-enabled commercial construction. Journal of Construction Engineering and Management, 136(4), 459–467. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000109
Eadie, R., Browne, M., Odeyinka, H., McKeown, C., & McNiff, S. (2013). BIM implementation throughout the UK construction project life-cycle: An analysis. Automation in Construction, 36, 145–151. https://doi.org/10.1016/j.autcon.2013.09.001
Eastman, C. M., Eastman, C., Teicholz, P., Sacks, R., & Liston, K. (2011). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. John Wiley & Sons.
Edmondson, V., Cerny, M., Lim, M., Gledson, B., Lockley, S., & Woodward, J. (2018). A smart sewer asset information model to enable an ‘Internet of Things’ for operational wastewater management. Automation in Construction, 91, 193–205. https://doi.org/10.1016/j.autcon.2018.03.003
Goulding, J. S., Rahimian, F. P., & Wang, X. (2014). Virtual reality-based cloud BIM platform for integrated AEC projects. Journal of Information Technology in Construction (ITcon), 19, 308–325.
Grilo, A., & Jardim-Goncalves, R. (2010). Value proposition on interoperability of BIM and collaborative working environments. Automation in Construction, 19(5), 522–530. https://doi.org/10.1016/j.autcon.2009.11.003
Habibi, S. (2017). The promise of BIM for improving building performance. Energy and Buildings, 153, 525–548. https://doi.org/10.1016/j.enbuild.2017.08.009
Heigermoser, D., de Soto, B. G., Abbott, E. L. S., & Chua, D. K. H.
(2019). BIM-based Last Planner System tool for improving construction project management. Automation in Construction, 104, 246–254. https://doi.org/10.1016/j.autcon.2019.03.019
Hilfert, T., & König, M. (2016). Low-cost virtual reality environment for engineering and construction. Visualization in Engineering, 4, 2. https://doi.org/10.1186/s40327-015-0031-5
Hood, W. W., & Wilson, C. S. (2001). The literature of bibliometrics, scientometrics, and informetrics. Scientometrics, 52(2), 291–314. https://doi.org/10.1023/A:1017919924342
Hosseini, M. R., Maghrebi, M., Akbarnezhad, A., Martek, I., & Arashpour, M. (2018a). Analysis of citation networks in Building Information Modeling research. Journal of Construction Engineering and Management, 144(8), 04018064. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001492
Hosseini, M. R., Martek, I., Zavadskas, E. K., Aibinu, A. A., Arashpour, M., & Chileshe, N. (2018b). Critical evaluation of off-site construction research: A Scientometric analysis. Automation in Construction, 87, 235–247. https://doi.org/10.1016/j.autcon.2017.12.002
Hou, L., Wang, X. Y., & Truijens, M. (2015). Using augmented reality to facilitate piping assembly: An experiment-based evaluation. Journal of Computing in Civil Engineering, 29(1), 05014007. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000344
Hu, Y. Q., Castro-Lacouture, D., & Eastman, C. M. (2019). Holistic clash detection improvement using a component dependent network in BIM projects. Automation in Construction, 105, 102832. https://doi.org/10.1016/j.autcon.2019.102832
Jang, S., & Lee, G. (2018). Process, productivity, and economic analyses of BIM based multi-trade prefabrication – A case study. Automation in Construction, 89, 86–98. https://doi.org/10.1016/j.autcon.2017.12.035
Jang, S., Jeong, Y., Lee, G., & Kang, Y. (2019). Enhancing subcontractors’ participation in BIM-based design coordination under a DBB contract. Journal of Management in Engineering, 35(6), 04019022. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000714
Jin, R. Y., Zou, Y., Gidado, K., Ashton, P., & Painting, N. (2019). Scientometric analysis of BIM-based research in construction engineering and management. Engineering Construction and Architectural Management, 26(8), 1750–1776. https://doi.org/10.1108/Ecam-08-2018-0350
Kaewunruen, S., Sresakoolchai, J., & Zhou, Z. (2020). Sustainability-based lifecycle management for bridge infrastructure using 6D BIM. Sustainability, 12(6), 2436. https://doi.org/10.3390/su12062436
Kaffash, S., Nguyen, A. T., & Zhu, J. (2021). Big data algorithms and applications in intelligent transportation system: A review and bibliometric analysis. International Journal of Production Economics, 231, 107868. https://doi.org/10.1016/j.ijpe.2020.107868
Karan, E. P., & Irizarry, J. (2015). Extending BIM interoperability to preconstruction operations using geospatial analyses and semantic web services. Automation in Construction, 53, 1–12. https://doi.org/10.1016/j.autcon.2015.02.012
Kensek, K., Ding, Y., & Longcore, T. (2016). Green building and biodiversity: Facilitating bird friendly design with building information models. Journal of Green Building, 11(2), 116–130. https://doi.org/10.3992/jgb.11.2.116.1
Khanzode, A., Fischer, M., & Reed, D. (2008). Benefits and lessons learned of implementing Building Virtual Design and Construction (VDC) technologies for coordination of Mechanical, Electrical, and Plumbing (MEP) systems on a large healthcare project. Journal of Information Technology in Construction (ITcon), 13, 324–342.
Khudhair, A., Li, H. J., Ren, G. Q., & Liu, S. (2021). Towards future BIM technology innovations: A bibliometric analysis of the literature. Applied Sciences, 11(3), 1232. https://doi.org/10.3390/app11031232
Lee, J., & Kim, J. (2017). BIM-Based 4D simulation to improve module manufacturing productivity for sustainable building projects. Sustainability, 9(3), 426. https://doi.org/10.3390/su9030426
Lee, G., & Borrmann, A. (2020). BIM policy and management. Construction Management and Economics, 38(5), 413–419. https://doi.org/10.1080/01446193.2020.1726979
Leite, F., Akcamete, A., Akinci, B., Atasoy, G., Kiziltas, S. (2011). Analysis of modeling effort and impact of different levels of detail in building information models. Automation in Construction, 20(5), 601–609. https://doi.org/10.1016/j.autcon.2010.11.027
Li, C. Z. D., Zhong, R. Y., Xue, F., Xu, G. Y., Chen, K., Huang, G. G. Q., & Shen, G. Q. P. (2017). Integrating RFID and BIM technologies for mitigating risks and improving schedule performance of prefabricated house construction. Journal of Cleaner Production, 165, 1048–1062. https://doi.org/10.1016/j.jclepro.2017.07.156
Li, C. Z., Xue, F., Li, X., Hong, J. K., & Shen, G. Q. (2018). An Internet of Things-enabled BIM platform for on-site assembly services in prefabricated construction. Automation in Construction, 89, 146–161. https://doi.org/10.1016/j.autcon.2018.01.001
Lindblad, H., & Guerrero, J. R. (2020). Client’s role in promoting BIM implementation and innovation in construction. Construction Management and Economics, 38(5), 468–482. https://doi.org/10.1080/01446193.2020.1716989
Liu, Y., van Nederveen, S., & Hertogh, M. (2017). Understanding effects of BIM on collaborative design and construction empirical study in China. International Journal of Project Management, 35(4), 686–698. https://doi.org/10.1016/j.ijproman.2016.06.007
Ma, Z. L., Zhang, D. D., & Li, J. L. (2018). A dedicated collaboration platform for Integrated Project Delivery. Automation in Construction, 86, 199–209. https://doi.org/10.1016/j.autcon.2017.10.024
Mahalingam, A., Yadav, A. K., & Varaprasad, J. (2015). Investigating the role of lean practices in enabling BIM adoption: Evidence from two Indian cases. Journal of Construction Engineering and Management, 141(7), 05015006. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000982
Martínez, J. M. G., Carracedo, P., Comas, D. G., & Siemens, C. H. (2022). An analysis of the blockchain and COVID-19 research landscape using a bibliometric study. Sustainable Technology and Entrepreneurship, 1(1), 100006. https://doi.org/10.1016/j.stae.2022.100006
Meho, L. I., & Rogers, Y. (2008). Citation counting, citation ranking, and h-index of human-computer interaction researchers: A comparison of Scopus and Web of Science. Journal of the American Society for Information Science and Technology, 59(11), 1711–1726. https://doi.org/10.1002/asi.20874
Miettinen, R., & Paavola, S. (2014). Beyond the BIM utopia: Approaches to the development and implementation of building information modeling. Automation in Construction, 43, 84–91. https://doi.org/10.1016/j.autcon.2014.03.009
Mirshokraei, M., De Gaetani, C. I., & Migliaccio, F. (2019). A web-based BIM–AR quality management system for structural elements. Applied Sciences, 9(19), 3984. https://doi.org/10.3390/app9193984
Mongeon, P., & Paul-Hus, A. (2016). The journal coverage of Web of Science and Scopus: A comparative analysis. Scientometrics, 106(1), 213–228. https://doi.org/10.1007/s11192-015-1765-5
Monteiro, A., & Martins, J. P. (2013). A survey on modeling guidelines for quantity takeoff-oriented BIM-based design. Automation in Construction, 35, 238–253. https://doi.org/10.1016/j.autcon.2013.05.005
Mostad, I. L., Qvigstad, E., Bjerve, K. S., & Grill, V. E. (2004). Effects of a 3-day low-fat diet on metabolic control, insulin sensitivity, lipids and adipocyte hormones in Norwegian subjects with hypertriacylglycerolaemia and type 2 diabetes. Scandinavian Journal of Clinical and Laboratory Investigation, 64(6), 565–574. https://doi.org/10.1080/00365510410007053
Muller, M. F., Garbers, A., Esmanioto, F., Huber, N., Loures, E. R., & Canciglieri, O. (2017). Data interoperability assessment though IFC for BIM in structural design – a five-year gap analysis. Journal of Civil Engineering and Management, 23(7), 943–954. https://doi.org/10.3846/13923730.2017.1341850
Olawumi, T. O., & Chan, D. W. M. (2018). A scientometric review of global research on sustainability and sustainable development. Journal of Cleaner Production, 183, 231–250. https://doi.org/10.1016/j.jclepro.2018.02.162
Oraee, M., Hosseini, M. R., Papadonikolaki, E., Palliyaguru, R., & Arashpour, M. (2017). Collaboration in BIM-based construction networks: A bibliometric-qualitative literature review. International Journal of Project Management, 35(7), 1288–1301. https://doi.org/10.1016/j.ijproman.2017.07.001
Oraee, M., Hosseini, M. R., Edwards, D. J., Li, H., Papadonikolaki, E., & Cao, D. (2019). Collaboration barriers in BIM-based construction networks: A conceptual model. International Journal of Project Management, 37(6), 839–854. https://doi.org/10.1016/j.ijproman.2019.05.004
Plume, J., & Mitchell, J. (2007). Collaborative design using a shared IFC building model – Learning from experience. Automation in Construction, 16(1), 28–36. https://doi.org/10.1016/j.autcon.2005.10.003
Porwal, A., & Hewage, K. N. (2013). Building Information Modeling (BIM) partnering framework for public construction projects. Automation in Construction, 31, 204–214. https://doi.org/10.1016/j.autcon.2012.12.004
Raouf, A. M., & Al-Ghamdi, S. G. (2019). Effectiveness of project delivery systems in executing green buildings. Journal of Construction Engineering and Management, 145(10), 03119005. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001688
Ratajczak, J., Riedl, M., & Matt, D. T. (2019). BIM-based and AR application combined with location-based management system for the improvement of the construction performance. Buildings, 9(5), 118. https://doi.org/10.3390/buildings9050118
Rosayuru, H. D. R. R., Waidyasekara, K. G. A. S., & Wijewickrama, M. K. C. S. (2022). Sustainable BIM based integrated project delivery system for construction industry in Sri Lanka. International Journal of Construction Management, 22(5), 769–783. https://doi.org/10.1080/15623599.2019.1645263
Sacks, R., Radosavljevic, M., & Barak, R. (2010). Requirements for building information modeling based lean production management systems for construction. Automation in Construction, 19(5), 641–655. https://doi.org/10.1016/j.autcon.2010.02.010
Sacks, R., Barak, R., Belaciano, B., Gurevich, U., & Pikas, E. (2013). KanBIM workflow management system: Prototype implementation and field testing. Lean Construction Journal, 2013, 19–35.
Sakin, M., & Kiroglu, Y. C. (2017). 3D printing of buildings: Construction of the sustainable houses of the future by BIM. Energy Procedia, 134, 702–711. https://doi.org/10.1016/j.egypro.2017.09.562
Santos, R., Costa, A. A., & Grilo, A. (2017). Bibliometric analysis and review of Building Information Modelling literature published between 2005 and 2015. Automation in Construction, 80, 118–136. https://doi.org/10.1016/j.autcon.2017.03.005
Shan, M., & Hwang, B. G. (2018). Green building rating systems: Global reviews of practices and research efforts. Sustainable Cities and Society, 39, 172–180. https://doi.org/10.1016/j.scs.2018.02.034
Singh, V., Gu, N., & Wang, X. Y. (2011). A theoretical framework of a BIM-based multi-disciplinary collaboration platform. Automation in Construction, 20(2), 134–144. https://doi.org/10.1016/j.autcon.2010.09.011
Su, L. (2017). Digitalization and application research of BIM-based power plants lifecycle information. Smart Innovation, 62, 218–224. https://doi.org/10.1007/978-981-10-3575-3_22
Succar, B. (2009). Building information modelling framework: A research and delivery foundation for industry stakeholders. Automation in Construction, 18(3), 357–375. https://doi.org/10.1016/j.autcon.2008.10.003
Tan, Y., Fang, Y., Zhou, T., Gan, V. J. L., & Cheng, J. C. P. (2019). BIM-supported 4D acoustics simulation approach to mitigating noise impact on maintenance workers on offshore oil and gas platforms. Automation in Construction, 100, 1–10. https://doi.org/10.1016/j.autcon.2018.12.019
Tateyama, K. (2017). A new stage of construction in Japan – i-construction. IPA News Letter, 2(2), 2–11.
Teizer, J., Golovina, O., Embers, S., & Wolf, M. (2020). A serious gaming approach to integrate BIM, IoT, and Lean construction in construction education. In Construction Research Congress 2020: Project Management and Controls, Materials, and Contracts, Tempe, Arizona. https://doi.org/10.1061/9780784482889.003
USACE. (2012). The US Army Corps of Engineers roadmap for life-cycle Building Information Modeling (BIM). https://erdc-library.erdc.dren.mil/jspui/handle/11681/4765
van Eck, N. J., & Waltman, L. (2014). CitNetExplorer: A new software tool for analyzing and visualizing citation networks. Journal of Informetrics, 8(4), 802–823. https://doi.org/10.1016/j.joi.2014.07.006
van Eck, N. J., & Waltman, L. (2017). Citation-based clustering of publications using CitNetExplorer and VOSviewer. Scientometrics, 111(2), 1053–1070. https://doi.org/10.1007/s11192-017-2300-7
Wang, J., Hou, L., Chong, H.-Y., Liu, X., Wang, X., & Guo, J. (2014). A cooperative system of GIS and BIM for traffic planning: A high-rise building case study. In Y. Luo (Ed.), Lecture notes in computer science: Vol 8683. Cooperative design, visualization, and engineering. CDVE 2014. Springer, Cham. https://doi.org/10.1007/978-3-319-10831-5_20
Wang, S. H., Wang, W. C., Wang, K. C., & Shih, S. Y. (2015). Applying building information modeling to support fire safety management. Automation in Construction, 59, 158–167. https://doi.org/10.1016/j.autcon.2015.02.001
Wang, T.-K., & Piao, Y. (2019). Development of BIM-AR-based facility risk assessment and maintenance system. Journal of Performance of Constructed Facilities, 33(6), 04019068. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001339
Wang, Y. K., Wang, S. L., Yang, B., Zhu, L. Z., & Liu, F. (2020). Big data driven Hierarchical Digital Twin Predictive Remanufacturing paradigm: Architecture, control mechanism, application scenario and benefits. Journal of Cleaner Production, 248, 15. https://doi.org/10.1016/j.jclepro.2019.119299
Wu, T., & Jeng, T. (2018). A cloud-based BIM platform for interior design. Journal of Design, 23(1), 43–60. https://doi.org/10.1111/joid.12123
Wu, W., Li, W. J., Law, D. F., & Na, W. K. (2015). Improving data center energy efficiency using a cyber-physical systems approach: Integration of building information modeling and wireless sensor networks. Procedia Engineering, 118, 1266–1273. https://doi.org/10.1016/j.proeng.2015.08.481
Wu, Z., Chen, C., Cai, Y., Lu, C., Wang, H., & Yu, T. (2019). BIM-based visualization research in the construction industry: A network analysis. International Journal of Environmental Research and Public Health, 16(18), 3473. https://doi.org/10.3390/ijerph16183473
Xie, X., Zang, Z., & Ponzoa, J. M. (2020). The information impact of network media, the psychological reaction to the COVID-19 pandemic, and online knowledge acquisition: Evidence from Chinese college students. Journal of Innovation & Knowledge, 5(4), 297–305. https://doi.org/10.1016/j.jik.2020.10.005
Yi, W., & Chan, A. P. C. (2014). Critical review of labor productivity research in construction journals. Journal of Management in Engineering, 30(2), 214–225. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000194
Yin, X. F., Liu, H. X., Chen, Y., & Al-Hussein, M. (2019). Building information modelling for off-site construction: Review and future directions. Automation in Construction, 101, 72–91. https://doi.org/10.1016/j.autcon.2019.01.010
Zaker, R., & Coloma, E. (2018). Virtual reality-integrated workflow in BIM-enabled projects collaboration and design review: a case study. Visualization in Engineering, 6, 4. https://doi.org/10.1186/s40327-018-0065-6
Zanni, M.-A., Soetanto, R., & Ruikar, K. (2014). Defining the sustainable building design process: methods for BIM execution planning in the UK. International Journal of Energy Sector Management, 8(4), 562–587. https://doi.org/10.1108/IJESM-04-2014-0005
Zhang, J. P., Liu, Q., Hu, Z. Z., Lin, J. R., & Yu, F. Q. (2017a). A multi-server information-sharing environment for cross-party collaboration on a private cloud. Automation in Construction, 81, 180–195. https://doi.org/10.1016/j.autcon.2017.06.021
Zhang, S. R., Pan, F., Wang, C., Sun, Y. J., & Wang, H. X. (2017b). BIM-based collaboration platform for the management of EPC projects in hydropower engineering. Journal of Construction Engineering and Management, 143(12), 04017087. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001403
Zhang, X., Azhar, S., Nadeem, A., & Khalfan, M. (2018). Using Building Information Modelling to achieve Lean principles by improving efficiency of work teams. International Journal of Construction Management, 18(4), 293–300. https://doi.org/10.1080/15623599.2017.1382083
Zhao, X. (2017). A scientometric review of global BIM research: Analysis and visualization. Automation in Construction, 80, 37–47. https://doi.org/10.1016/j.autcon.2017.04.002
Zhao, X. B., Zuo, J., Wu, G. D., & Huang, C. (2019). A bibliometric review of green building research 2000–2016. Architectural Science Review, 62(1), 74–88. https://doi.org/10.1080/00038628.2018.1485548
Zheng, L. Z., Lu, W. S., Chen, K., Chau, K. W., & Niu, Y. H. (2017). Benefit sharing for BIM implementation: Tackling the moral hazard dilemma in inter-firm cooperation. International Journal of Project Management, 35(3), 393–405. https://doi.org/10.1016/j.ijproman.2017.01.006
Zheng, R. Y., Jiang, J. L., Hao, X. H., Ren, W., Xiong, F., & Ren, Y. (2019). bcBIM: A Blockchain-Based Big Data Model for BIM modification audit and provenance in mobile cloud. Mathematical Problems in Engineering, 2019, 5349538. https://doi.org/10.1155/2019/5349538
Zheng, X., Le, Y., Chan, A. P. C., Hu, Y., & Li, Y. K. (2016). Review of the application of social network analysis (SNA) in construction project management research. International Journal of Project Management, 34(7), 1214–1225. https://doi.org/10.1016/j.ijproman.2016.06.005